Description

The basic construction is identical with that of the High-Temperature Type. The function of this arrangement is to prevent the slurry handled from entering into the rotor chamber. Clean compatible liquid with the liquid handled is flushed from the inlet port established at the rear of the motor to prevent slurry from entering into the rotor chamber, for which back flushing line would have to be established. for the amount of liquid used for back flushing.

  Application

Ideal for use in light slurries with solids upto 5%.

  Operating Range

Flow : 1 to 500 m3/hr
Head : upto 140m, higher head upon request
Temp : -80 to 100° C
Pressure : atmospheric to 15 kg/cm2